Curioustab

More Questions from Airport Engineering

The distance between main gears is 10 m, and the distance of nose gear from centre of main gears ...
Runway orientation principle: landing and take-off should be aligned in which direction relative ...
Airport reference point (ARP): identify the correct statements about its definition, mapping refe...
Runway numbering: If the magnetic bearing of the runway centerline at the threshold is 290°, what...
According to ICAO coding used historically in exam literature, runway pavement strength classific...
Approach geometry and obstacle limitation: identify the correct statements about the approach are...
In airport planning and runway orientation analysis, the most suitable direction for a new runway...
In aviation navigation and airport operations, identify the correct abbreviations: I.L.S. for Ins...
For runway length corrections due to elevation, the length is increased by what percentage for ev...
Which of the following components is NOT inapplicable to an airplane (i.e., all are applicable ae...
For a proposed airport, which plans are typically produced during the survey and planning stage?
Effective runway length is defined as the distance between which two points relevant to obstacle ...
Airport engineering – clearway width requirement at runway end An aircraft has a lift-off distanc...
Airport lighting – threshold light colour for night landings During night landing operations, wha...
Sight distance for landing – assumed pilot’s eye height For approach and runway sight-distance ca...
Runway length correction for elevation – design length determination A runway has a basic length ...
Instrument Landing System (ILS) components – relative siting In a standard ILS arrangement for a ...
Runway system planning – arrangements of two single runways Two single runways on an airfield may...
Ground maneuvering – maximum nose-gear steering angle for large jets What is the typical maximum ...
Fuel-resistant airfield pavements – material suitability Which statements about fuel-resistant pa...
Airfield planning – key factors linking aircraft characteristics to facilities Which of the follo...

The distance between main gears is 10 m, and the distance of nose gear from centre of main gears is 30 m. If the angle of turning is 60°, the distance of centre of rotation from the nearer main gear, is

Civil Engineering Airport Engineering

Choose an option

A

12.30 m
B

11.30 m
C

10.30 m
D

9.30 m

Answer

Correct Answer: 12.30 m

← Previous Next Question →

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion