Curioustab

Home » Chemical Engineering » Petroleum Refinery Engineering

__________ is not an important refinery process for upgrading the quality of lubricating oil.

Deoiling
Solvent refinning
Clay treatment
Hydrotreatment

Correct Answer: Deoiling

← Previous Question Next Question→

More Questions from Petroleum Refinery Engineering

__________ test is done to find out the softening point of bitumen.
Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the
Feedstock for the production of biodiesel is
Flash point of an oil is determined by the
Naphthenic acid is a/an __________ compound.
Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely mis-cible. It means that the aniline point of the diesel is __________ the room temperature.
Preheating temperature of medium viscosity furnace oil for better atomisation through burner is about __________ °C.
The most widely used crude topping column in refineries is the __________ column.
Crude oil is transported inland from oil field to refineries, mainly by the
Catalyst used in catalytic polymerisation which produces polymer gasoline is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion