Solve this multiple-choice question and choose the correct option.

Home » Mechanical Engineering » Engineering Materials

Steelmaking at TISCO (Jamshedpur): traditional primary process used historically Identify which steelmaking process has historically been in operation at Tata Iron and Steel Works (Jamshedpur) as per traditional references. Choose the correct process.

Difficulty: Easy

Bessemer process
Open hearth process
Duplex process
Electric process

Correct Answer: Open hearth process

Explanation:

ContextTraditional examination references cite the open hearth process as historically practiced at TISCO, Jamshedpur (before widespread adoption of basic oxygen/electric steelmaking).

Why not othersThe Bessemer process was less suited for high-quality control; electric and duplex routes are used, but the classic answer for older plants/MCQs is open hearth.

Final AnswerOpen hearth process

← Previous Question Next Question→

More Questions from Engineering Materials

Blast furnace charging: location through which the charge is fed In an iron-making blast furnace, identify the correct region/part through which the solid charge (ore, coke, flux) is fed into the furnace. Choose the correct part.
Quality comparison of steelmaking routes: Bessemer/Open-hearth vs. LD (basic oxygen) Complete the statement about product quality: Steel produced by the Bessemer or open-hearth process is __________ to that produced by the L–D (basic oxygen) process. Choose the most appropriate comparative term and justify.
Cast irons: element added to produce nodular (spheroidal graphite) iron Identify the element intentionally added to molten cast iron to produce nodular/spheroidal graphite (SG iron). Choose the correct element.
Metallurgy: effect of silicon addition to copper Silicon is added to copper (silicon bronze) as an alloying element. Which property combination is most improved by silicon in copper alloys? Choose the correct option.
Steel microstructures and hardness ranking Among common steel microstructures (pearlite, ferrite, cementite, martensite), which one gives the highest hardness under typical heat-treatment conditions? Choose the correct option.
Identify the composition of brass (basic metallurgy recall) Brass is an alloy of which elements? Choose the correct option.
Foundry practice: purpose of the cupola furnace A cupola is employed in foundries primarily to produce or melt which ferrous material for casting? Choose the correct option.
Where is cast iron manufactured/melted for foundry use? Select the most appropriate furnace commonly used to produce molten cast iron from pig iron and scrap for casting. Choose the correct option.
Work-hardenable alloy steel for earthmoving equipment blades Blades of bulldozers, bucket wheel excavators, and similar equipment use a work-hardenable alloy steel. Besides Fe and C, which alloying element characterizes this steel? Choose the correct option.
Superalloys: nickel content comparison between Nimonic and Inconel Complete the statement about Ni content: “Nimonic contains __________ percentage of nickel as compared to Inconel.” Choose the best completion.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion