logo

CuriousTab

CuriousTab

Computer Hardware problems


  • 1. If the voltage on pin 1 of the power supply is not in the range of _____ volts, the PC will not boot.

  • Options
  • A. 10 - 20
  • B. 1 - 5
  • C. 50 - 110
  • D. 15 - 25
  • E. 2.5 - 5
  • Discuss
  • 3. Which component must be vacuumed or replaced during preventative maintenance on a laser printer?

  • Options
  • A. Scanning mirror
  • B. Toner cartridge
  • C. Ozone filter
  • D. All of the above
  • E. None of the above
  • Discuss
  • 4. A PC with a 486DX2 processor runs internally at 50Mhz. What speed would its external logic be running?

  • Options
  • A. l0Mhz
  • B. 25Mhz
  • C. 50Mhz
  • D. 100 Mhz
  • E. None of the above
  • Discuss
  • 5. What are the most likely conditions for ESD?

  • Options
  • A. Hot and dry
  • B. Hot and wet
  • C. Cold and dry
  • D. Cold and wet
  • E. None of the above
  • Discuss
  • 6. Which of the following items would require you t.o comply with EPA disposal guidelines?

  • Options
  • A. Keyboard
  • B. System board
  • C. Power supply
  • D. Battery
  • E. None of the above
  • Discuss
  • 7. Static electricity thrives is which type of environment?

  • Options
  • A. cold and humid
  • B. warm and humid
  • C. warm and dry
  • D. cold and warm
  • E. cold and dry
  • Discuss
  • 8. How is ink transferred to paper in common ink jet printers?

  • Options
  • A. Boiling ink
  • B. Crystal
  • C. Motorized pump
  • D. Screens deflect ink on the paper into the proper positions
  • E. Ink is sprayed on to the paper and managed by a nozzle
  • Discuss
  • 9. The digital multimeter is set for DC, Ohm and 20k. You will read _____ while measuring a good 2 amp fuse.

  • Options
  • A. 0.00
  • B. 0.02
  • C. 0.20
  • D. 2.00
  • E. None of the above
  • Discuss
  • 10. Which would you have to upgrade to install an EIDE drive?

  • Options
  • A. RAM BIOS
  • B. A 286 CPU
  • C. Controller board
  • D. ISA motherboard
  • E. None of the above
  • Discuss

First 16 17 18 ... 26 .. 34 35 Last