logo

CuriousTab

CuriousTab

RCC Structures Design problems


  • 1. Piles are usually driven by

  • Options
  • A. diesel operated hammer
  • B. drop hammer
  • C. single acting steam hammer
  • D. all the above.
  • Discuss
  • 2. The length of the lap in a compression member is kept greater than bar diameter x (Permissible stress in bar / Five times the bond stress) or

  • Options
  • A. 12 bar diameters
  • B. 18 bar diameters
  • C. 24 bar diameters
  • D. 30 bar diameters
  • E. 36 bar diameters
  • Discuss
  • 3. The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend, is

  • Options
  • A. 30°
  • B. 40°
  • C. 45°
  • D. 60°
  • E. all the above.
  • Discuss
  • 4. If the shear stress in a R.C.C. beam is

  • Options
  • A. equal or less than 5 kg/cm2, no shear reinforcement is provided
  • B. greater than 4 kg/cm2, but less than 20 kg/cm2, shear reinforcement is provided
  • C. greater than 20 kg/cm2, the size of the section is changed
  • D. all the above.
  • Discuss
  • 5. In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at

  • Options
  • A. less loaded column
  • B. more loaded column
  • C. a point equidistant from either column
  • D. a point of the maximum shear force
  • E. a point of zero shear force.
  • Discuss
  • 6. P is the prestressed force applied to the tendon of a rectangular prestressed beam whose area of cross section is A and sectional modulus is Z. The maximum stress f in the beam, subjected to a maximum bending moment M, is

  • Options
  • A.
  • B.
  • C.
  • D.
  • E.
  • Discuss
  • 7. A circular slab subjected to external loading, deflects to form a

  • Options
  • A. semi-hemisphere
  • B. ellipsoid
  • C. parabolloid
  • D. none of these.
  • Discuss
  • 8. The Total pressure on the vertical face of a retaining wall of height h exerted by the retained earth weighing w per unit volume having an angle of surcharge ?°, is :

  • Options
  • A.
  • B.
  • C.
  • D.
  • Discuss
  • 9. If Sb, is the average bond stress on a bar of diameter d subjected to maximum stress t, the length of the embedment l is given by

  • Options
  • A.
  • B.
  • C.
  • D.
  • E.
  • Discuss
  • 10. In favourable circumstances a 15 cm concrete cube after 28 days, attains a maximum crushing strength

  • Options
  • A. 100 kg/cm2
  • B. 200 kg/cm2
  • C. 300 kg/cm2
  • D. 400 kg/cm2
  • E. 500 kg/cm2
  • Discuss

First 13 14 15 ... 19 .. 23 24 Last