Curioustab

Home » Civil Engineering » RCC Structures Design

If R and T are rise and tread of a stair spanning horizontally, the steps are supported by a wall on one side and by a stringer beam on the other side, the steps are designed as beams of width

R + T
T-R
R2 + T2
R-T

Correct Answer: R2 + T2

← Previous Question Next Question→

More Questions from RCC Structures Design

A prestressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent tendon with tension P such that central one-third portion of the tendon remains parallel to the longitudinal axis, the maximum dip h is
A short column 20 cm x 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2, the Safe load on the column, should not exceed
Thickened part of a flat slab over its supporting column, is technically known as
The minimum cube strength of concrete used for a prestressed member, is
For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is
The thickness of base slab of a retaining wall generally provided, is
A foundation rests on
A continuous beam shall be deemed to be a deep beam if the ratio of effective span to overall depth, is
An R.C.C. column is treated as long if its slenderness ratio is greater than
If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion