Curioustab

Which of the following is true regarding RIPv2?

It has a lower administrative distance than RIPv1.
It converges faster than RIPv1.
It has the same timers as RIPv1.
It is harder to configure than RIPv1.

Correct Answer: It has the same timers as RIPv1.

Explanation:

RIPv2 is pretty much just like RIPv1. It has the same administrative distance and timers and is configured just like RIPv1.

← Previous Question Next Question→

More Questions from IP Routing

What is split horizon?
You have the following routing table. Which of the following networks will not be placed in the neighbor routing table? R 192.168.30.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0 C 192.168.40.0/24 is directly connected, Serial0 172.16.0.0/24 is subnetted, 1 subnets C 172.16.30.0 is directly connected, Loopback0 R 192.168.20.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0 R 10.0.0.0/8 [120/15] via 192.168.40.1, 00:00:07, Serial0 C 192.168.50.0/24 is directly connected, Ethernet0
A network administrator views the output from the show ip route command. A network that is advertised by both RIP and IGRP appears in the routing table flagged as an IGRP route. Why is the RIP route to this network not used in the routing table?
Two connected routers are configured with RIP routing. What will be the result when a router receives a routing update that contains a higher-cost path to a network already in its routing table?
Which two of the following are true regarding the distance-vector and link-state routing protocols? Link state sends its complete routing table out all active interfaces on periodic time intervals. Distance vector sends its complete routing table out all active interfaces on periodic time intervals. Link state sends updates containing the state of its own links to all routers in the internetwork. Distance vector sends updates containing the state of its own links to all routers in the internetwork.
You type debug ip rip on your router console and see that 172.16.10.0 is being advertised to you with a metric of 16. What does this mean?
What does RIPv2 use to prevent routing loops? CIDR Split horizon Authentication Classless masking Holddown timers
IGRP uses which of the following as default parameters for finding the best path to a remote network? Hop count MTU Cumulative interface delay STP Path bandwidth value
Which command displays RIP routing updates?
Which statement is true regarding classless routing protocols? The use of discontiguous networks is not allowed. The use of variable length subnet masks is permitted. RIPv1 is a classless routing protocol. IGRP supports classless routing within the same autonomous system. RIPv2 supports classless routing.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion