IGRP uses which of the following as default parameters for finding the best path to a remote network? Hop count MTU Cumulative interface delay STP Path bandwidth value

1 and 3
3 and 5
2, 3 and 5
All of the above

Correct Answer: 3 and 5

Explanation:

IGRP uses bandwidth and delay of the line, by default, to determine the best path to a remote network. Delay of the line can sometimes be called the cumulative interface delay.

More Questions from IP Routing

Which command displays RIP routing updates?
Which statement is true regarding classless routing protocols? The use of discontiguous networks is not allowed. The use of variable length subnet masks is permitted. RIPv1 is a classless routing protocol. IGRP supports classless routing within the same autonomous system. RIPv2 supports classless routing.
The Corporate router receives an IP packet with a source IP address of 192.168.214.20 and a destination address of 192.168.22.3. Looking at the output from the Corporate router, what will the router do with this packet? Corp#sh ip route [output cut] R 192.168.215.0 [120/2] via 192.168.20.2, 00:00:23, Serial0/0 R 192.168.115.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0 R 192.168.30.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0 C 192.168.20.0 is directly connected, Serial0/0 C 192.168.214.0 is directly connected, FastEthernet0/0
Which of the following statements are true regarding the command ip route 172.16.4.0 255.255.255.0 192.168.4.2? The command is used to establish a static route. The default administrative distance is used. The command is used to configure the default route. The subnet mask for the source address is 255.255.255.0.

Discussion & Comments

No comments yet. Be the first to comment!