A welded joint as compared to a riveted joint has __________ strength.

More Questions from Strength of Materials

• A body is subjected to two normal stresses 20 kN/m2 (tensile) and 10 kN/m2 (compressive) acting perpendicular to each other. The maximum shear stress is
• When a cantilever beam is loaded at its free end, the maximum compressive stress shall develop at
• A beam of uniform strength has
• In the below figure, the stress corresponding to point D is
• Two shafts 'A' and 'B' are made of same material. The shaft 'A' is solid and has diameter D. The shaft 'B' is hollow with outer diameter D and inner diameter D/2. The strength of hollow shaft in torsion is __________ as that of solid shaft.
• The extremeties of any diameter on Mohr's circle represent
• The ductility of a material __________ with the increase in percentage reduction in area of a specimen under tensile test.
• Principle plane is a plane on which the shear stress is
• The ratio of change in volume to the original volume is called
• The shear force diagram for a simply supported beam carrying a uniformly distributed load of w per unit length, consists of

Discussion & Comments