Curioustab

Home » Mechanical Engineering » Strength of Materials

The product of Young's modulus (E) and moment of inertia (I) is known as

modulus of rigidity
bulk modulus
flexural rigidity
torsional rigidity

Correct Answer: flexural rigidity

← Previous Question Next Question→

More Questions from Strength of Materials

The actual neutral axis of a reinforced cement concrete beam is based on the principle that the moment of areas of compression and tension zones at the neutral axis are equal.
A column of length (l) with both ends fixed may be considered as equivalent to a column of length __________ with one end fixed and the other end free.
If there is a fall in the temperature of a composite body, then a member having greater coefficient of linear expansion will be subjected to compressive stress.
The buckling load for a given column depends upon
The hoop stress in a riveted cylindrical shell of diameter (d), thickness (t) and subjected to an internal pressure (p) is (where η = Efficiency of the riveted joint)
Fatigue test is carried out for
According to Euler's column theory, the crippling load of a column is given by p = π2 EI/Cl2. In the Euler's formula, the value of C for a column with both ends fixed is 4.
When a closely-coiied helical spring of mean diameter (D) is subjected to an axial load (W), the deflection of the spring (δ) is given by (where d = Diameter of spring wire, n = No. of turns of the spring, and C = Modulus of rigidity for the spring material)
If percentage elongation of a certain specimen made of a material 'A' under tensile test is 30% and the percentage elongation of a specimen with same dimensions made of another material 'B' is 40%, then material 'B' is more ductile than material 'A'.
In the below figure, the point B represents upper yield point.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion