Curioustab

Home » Mechanical Engineering » Strength of Materials

A beam of uniform strength has

same cross-section throughout the beam
same bending stress at every section
same bending moment at every section
same shear stress at every section

Correct Answer: same bending stress at every section

← Previous Question Next Question→

More Questions from Strength of Materials

In the below figure, the stress corresponding to point D is
Two shafts 'A' and 'B' are made of same material. The shaft 'A' is solid and has diameter D. The shaft 'B' is hollow with outer diameter D and inner diameter D/2. The strength of hollow shaft in torsion is __________ as that of solid shaft.
The extremeties of any diameter on Mohr's circle represent
The ductility of a material __________ with the increase in percentage reduction in area of a specimen under tensile test.
Principle plane is a plane on which the shear stress is
The ratio of change in volume to the original volume is called
The shear force diagram for a simply supported beam carrying a uniformly distributed load of w per unit length, consists of
When a closely-coiled helical spring is subjected to an axial load, it is said to be under
When two shafts of same length, one of which is hollow, transmit equal torques and have equal maximum stress, then they should have equal
For a 25 mm hole drilled in plates, the diameter of rivet shank should be

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion