In surface condensers, the condensate and the cooling water mixes up.

More Questions from Steam Boilers and Engines

• The principal function of a stop valve is to
• In a steam condenser, the partial pressure of steam and air are 0.06 bar and 0.007 bar respectively. The condenser pressure is
• A vessel into which the steam is exhausted and condensed after doing work in an engine cylinder or turbine is known as
• A valve installed between the boiler and the feed pump is
• The draught in locomotive boilers is produced by a
• The ratio of the energy required to produce the artificial draught (expressed in metres head or J/kg of flue gas) to the mechanical equivalent of extra heat carried away per kg of flue gases due to natural draught, is known as
• Which of the following statement is correct?
• A condenser maintains a low pressure (below atmospheric) so as to obtain the maximum possible energy from steam and thus to secure a high efficiency.
• The crown of the fire box is made hemispherical in order to resist intense heat in the fire box.
• The indicated thermal efficiency is defined as the

Discussion & Comments