Curioustab

Home » Mechanical Engineering » Production Engineering

For turning internal tapers, the suitable method is

by a form tool
by setting over the tail stock
by a taper turning attachment
by swivelling the compound rest

Correct Answer: by a taper turning attachment

← Previous Question Next Question→

More Questions from Production Engineering

In an orthogonal cutting, the depth of cut is halved and the feed rate is double. If the chip thickness ratio is unaffected with the changed cutting conditions, the actual chip thickness will be
The correct sequence of the following parameters in order of their maximum to minimum influence on tool life is
For machining a cast iron workpiece by a high speed steel tool, the average cutting speed is
An open structure of a grinding wheel is denoted by the number 1 to 8.
Lathe bed is made of
The form grinding is used to grind gear teeth, threads, splined shafts and holes.
Surface grinding is done to produce
Continuous chips with built up edge are formed during machining of
Crack in grinding wheel is developed due to
In a milling operation, two side milling cutters are mounted with a desired distance between them so that both sides of a workpiece can be milled simultaneously. This set up is called

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion