Curioustab

Home » Mechanical Engineering » IC Engines and Nuclear Power Plants

The volumetric efficiency ofa well designed engine may be

30 to 40%
40 to 60%
60 to 70%
75 to 90%

Correct Answer: 75 to 90%

← Previous Question Next Question→

More Questions from IC Engines and Nuclear Power Plants

The brake power is the power available
Which of the following statement is correct regarding the features of a Breeder reactor?
If the compression ratio in I.C. engine increases, then its thermal efficiency will
The ignition of the charge by some hot surface within the engine before the passage of spark is called
A nuclear reactor is said to be critical when the neutron population in the reactor core is
In diesel engines, the ignition takes place due to the heat produced in the engine cylinder at the end of compression.
A power plant giving least running cost of production of electrical power is
The loud pulsating noise heard within the cylinder of an internal combustion engine is known as
The slowing down of fast neutrons is desirable because slow moving neutrons are more effective than fast neutrons in triggering fission.
The brake power (B.P.) of the engine is given by (where W = Brake load or dead load in newtons, l = Length of arm in metres, N = Speed of engine in r.p.m., S - Spring balance reading in newtons, D = Dia. of brake drum in metres, and d = Dia. of rope in metres)

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion