Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Electronics and Communication Engineering
»
Power Electronics
Assertion (A): A high dv/dt may cause triggering of a thyristor. Reason (R): A high dv/dt results in charging current in the thyristor.
Both A and R are correct and R is correct explanation of A
Both A and R correct but R is not correct explanation of A
A is correct but R is wrong
A is wrong but R is correct
Correct Answer:
Both A and R are correct and R is correct explanation of A
Explanation:
The charging current may cause triggering.
← Previous Question
Next Question→
More Questions from
Power Electronics
A thyristor has maximum allowable junction temperature of 110° C and the ambient temperature is 40°C, If the maximum internal power dissipation is 50 W, the thermal resistance is
A 3 phase induction motor is controlled by voltage and frequency control such that the ratio V/f is constant. At 50 Hz, the speed is 1440 rpm. At 25 Hz, the speed is likely to be
To protect an SCR against high di/dt we connect
A single phase half wave regulator uses
A thyristor has internal power dissipation of 40W and is operated at an ambient temperature of 20°C. If thermal resistance is 1.6° C/W, the junction temperature is
In a 3 phase semiconverter, the dc output voltage for a certain firing angle is 50% of the maximum possible value. The firing angle is
A single phase half wave converter is used to charge a battery of 50 V. The thyristor is continuously fired by dc signal. Input voltage is v = Vm sin ωt. The thyristor will conduct
Assertion (A): A GTO circuit is more compact than SCR circuit Reason (R): A GTO can be turned off by negative gate pulse.
In a stud mounted SCR, the stud is
McMurray Bedford full bridge inverter uses
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments