Curioustab

Home » Electrical Engineering » RLC Circuits and Resonance

A certain series resonant circuit has a bandwidth of 2 kHz. If the existing coil is replaced with one having a higher value of Q, the bandwidth will

increase
remain the same
decrease
be less selective

Correct Answer: decrease

Next Question→

More Questions from RLC Circuits and Resonance

A 200 Ω resistor, a coil with 30 Ω of reactance, and a capacitor of unknown reactance are in series across an ac source. The circuit is at resonance. Circuit impedance
Referring to Problem 20, what is the total parallel resistance (Rp(tot))?
A resonant circuit has a lower critical frequency of 7 kHz and an upper critical frequency of 13 kHz. The bandwidth of the circuit is
A resistor of 3 kΩ, a 0.05 µF capacitor, and a 120 mH coil are in series across a 5 kHz, 20 V ac source. What is the impedance, expressed in polar form?
A 15 Ω resistor, an inductor with 8 Ω inductive reactance, and a capacitor with 12 Ω capacitive reactance are in parallel across an ac voltage source. The circuit impedance is
A 90 Ω resistor, a coil with 30 Ω of reactance, and a capacitor with 50 Ω of reactance are in series across a 12 V ac source. The current through the resistor is
A 9 mH coil is in parallel with a 0.015 µF capacitor across an 18 kHz ac source. The coil's internal resistance, RW, is 60 Ω. The circuit impedance is
A 15 Ω resistor, a 220 µH coil, and a 60 pF capacitor are in series across an ac source. What is the bandwidth of the circuit?
In a series RLC circuit that is operating above the resonant frequency, the current
In a certain series resonant circuit, VC = 125 V, VL = 125 V, and VR = 40 V. The value of the source voltage is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion