Curioustab

Home » Electrical Engineering » RLC Circuits and Resonance

A 200 Ω resistor, a coil with 30 Ω of reactance, and a capacitor of unknown reactance are in series across an ac source. The circuit is at resonance. Circuit impedance

is 230 Ω
is 170 Ω
is 200 Ω
cannot be determined

Correct Answer: is 200 Ω

← Previous Question Next Question→

More Questions from RLC Circuits and Resonance

Referring to Problem 20, what is the total parallel resistance (Rp(tot))?
A resonant circuit has a lower critical frequency of 7 kHz and an upper critical frequency of 13 kHz. The bandwidth of the circuit is
A resistor of 3 kΩ, a 0.05 µF capacitor, and a 120 mH coil are in series across a 5 kHz, 20 V ac source. What is the impedance, expressed in polar form?
A 15 Ω resistor, an inductor with 8 Ω inductive reactance, and a capacitor with 12 Ω capacitive reactance are in parallel across an ac voltage source. The circuit impedance is
A 90 Ω resistor, a coil with 30 Ω of reactance, and a capacitor with 50 Ω of reactance are in series across a 12 V ac source. The current through the resistor is
A 9 mH coil is in parallel with a 0.015 µF capacitor across an 18 kHz ac source. The coil's internal resistance, RW, is 60 Ω. The circuit impedance is
A 15 Ω resistor, a 220 µH coil, and a 60 pF capacitor are in series across an ac source. What is the bandwidth of the circuit?
In a series RLC circuit that is operating above the resonant frequency, the current
In a certain series resonant circuit, VC = 125 V, VL = 125 V, and VR = 40 V. The value of the source voltage is
A 10 Ω resistor, a 90 mH coil, and a 0.015 µF capacitor are in series across an ac source. The impedance magnitude at 1,200 Hz below fr is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion