Curioustab

Home » Electrical Engineering » RLC Circuits and Resonance

In a certain series resonant circuit, VC = 125 V, VL = 125 V, and VR = 40 V. The value of the source voltage is

125 V
250 V
290 V
40 V

Correct Answer: 40 V

← Previous Question Next Question→

More Questions from RLC Circuits and Resonance

A 10 Ω resistor, a 90 mH coil, and a 0.015 µF capacitor are in series across an ac source. The impedance magnitude at 1,200 Hz below fr is
If the resistance in parallel with a parallel resonant circuit is reduced, the bandwidth
A 6.8 kΩ resistor, a 7 mH coil, and a 0.02 µF capacitor are in parallel across a 17 kHz ac source. The coil's internal resistance, RW, is 30 Ω. The equivalent parallel resistance, Rp(eq), is
A certain series RLC circuit with a 200 Hz, 15 V ac source has the following values: R = 12 Ω, C = 80 µF, and L = 10 mH. The total impedance, expressed in polar form, is
A 24 Ω resistor, an inductor with a reactance of 120 Ω, and a capacitor with a reactance of 120 Ω are in series across a 60 V source. The circuit is at resonance. The voltage across the inductor is
To tune a parallel resonant circuit to a higher frequency, the capacitance should be
The impedance at the resonant frequency of a series RLC circuit with L = 20 mH, C = 0.02 µF, and RW = 90 Ω is
A 12 Ω resistor, a 40 µF capacitor, and an 8 mH coil are in series across an ac source. The resonant frequency is
Referring to Problem 8, the total current is
If the value of C in a series RLC circuit is decreased, the resonant frequency

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion