Curioustab

Home » Electrical Engineering » RLC Circuits and Resonance

A 90 Ω resistor, a coil with 30 Ω of reactance, and a capacitor with 50 Ω of reactance are in series across a 12 V ac source. The current through the resistor is

9 mA
90 mA
13 mA
130 mA

Correct Answer: 130 mA

← Previous Question Next Question→

More Questions from RLC Circuits and Resonance

A 9 mH coil is in parallel with a 0.015 µF capacitor across an 18 kHz ac source. The coil's internal resistance, RW, is 60 Ω. The circuit impedance is
A 15 Ω resistor, a 220 µH coil, and a 60 pF capacitor are in series across an ac source. What is the bandwidth of the circuit?
In a series RLC circuit that is operating above the resonant frequency, the current
In a certain series resonant circuit, VC = 125 V, VL = 125 V, and VR = 40 V. The value of the source voltage is
A 10 Ω resistor, a 90 mH coil, and a 0.015 µF capacitor are in series across an ac source. The impedance magnitude at 1,200 Hz below fr is
If the resistance in parallel with a parallel resonant circuit is reduced, the bandwidth
A 6.8 kΩ resistor, a 7 mH coil, and a 0.02 µF capacitor are in parallel across a 17 kHz ac source. The coil's internal resistance, RW, is 30 Ω. The equivalent parallel resistance, Rp(eq), is
A certain series RLC circuit with a 200 Hz, 15 V ac source has the following values: R = 12 Ω, C = 80 µF, and L = 10 mH. The total impedance, expressed in polar form, is
A 24 Ω resistor, an inductor with a reactance of 120 Ω, and a capacitor with a reactance of 120 Ω are in series across a 60 V source. The circuit is at resonance. The voltage across the inductor is
To tune a parallel resonant circuit to a higher frequency, the capacitance should be

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion