logo

CuriousTab

CuriousTab

Discussion


Home Technical Drawing Gears and Cams See What Others Are Saying!
  • Question
  • Gears are used to transmit power and rotating or reciprocating motion from one machine part to another.


  • Options
  • A. True
  • B. False

  • Correct Answer
  • True 


  • More questions

    • 1. This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:

    • Options
    • A. Computer-aided manufacturing
    • B. Computer-aided design
    • C. Computer-aided engineering
    • D. Computer-aided prototyping
    • Discuss
    • 2. In oblique sketches, the most commonly used angles for receding lines are:

    • Options
    • A. 15 or 30 degrees
    • B. 25 or 30 degrees
    • C. 30 or 45 degrees
    • D. 45 or 60 degrees
    • Discuss
    • 3. When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.

    • Options
    • A. Linear dimension
    • B. Aligned dimension
    • C. Baseline dimension
    • D. Angle dimension
    • Discuss
    • 4. A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.

    • Options
    • A. architectural
    • B. civil
    • C. mechanical
    • D. process piping
    • Discuss
    • 5. When using the descriptive geometry method to create an auxiliary view the drafter should ________.

    • Options
    • A. rotate the snap grid to the same angle of the inclined plane
    • B. offset the right vertical line of the front view
    • C. rotate the top line of the front view 45 degrees
    • D. offset the top line of the front view 2 inches
    • Discuss
    • 6. When designing a home for a client, one of the most important pre-design considerations that an architect needs to address is ________.

    • Options
    • A. how much money the client is willing to spend.
    • B. the site on which the house is to sit
    • C. the nearest grocery store
    • D. whether or not there is a curb and gutter system
    • Discuss
    • 7. Some of the common terms used to describe technical drawing include:

    • Options
    • A. Drafting
    • B. Engineering Graphics
    • C. Engineering Drawing
    • D. All of the above
    • Discuss
    • 8. This is a flat or rounded tab protruding from a surface, usually to provide a method for attachment:

    • Options
    • A. Lug
    • B. Boss
    • C. Chamfer
    • D. Spotface
    • Discuss
    • 9. In this type of concrete, the steel is pretensioned before the superimposed load is applied:

    • Options
    • A. Aggregate
    • B. Prestressed
    • C. Reinforced
    • D. Preloaded
    • Discuss
    • 10. This is a conical-shaped recess around a hole, often used to receive a tapered screw head:

    • Options
    • A. Boss
    • B. Spotface
    • C. Counterbore
    • D. Countersink
    • Discuss


    Comments

    There are no comments.

Enter a new Comment