Discussion
Home ‣ Technical Drawing ‣ Auxiliary Views See What Others Are Saying!
- Question
The center line of a hidden cylinder feature appearing in the front view should line up with the center mark in the corresponding circle which appears in the auxiliary view.
Options- A. True
- B. False
- Correct Answer
- True
- 1. Using CAD, you are typically able to select viewing distance, focal point, z-axis convergence, and arc resolution scale for perspective representations.
Options- A. True
- B. False Discuss
- 2. In 3D assemblies, the last part added to the assembly becomes the parent part.
Options- A. True
- B. False Discuss
- 3. Width is shown in the rear, top, front, and bottom views.
Options- A. True
- B. False Discuss
- 4. Axonometric, oblique, and perspective sketches show objects pictorially.
Options- A. True
- B. False Discuss
- 5. The meaning of each line on a technical drawing is indicated by its width and its particular line style.
Options- A. True
- B. False Discuss
- 6. Springs may be classified as either helical springs or flat springs.
Options- A. True
- B. False Discuss
- 7. A skeleton assembly can be used to define locations of individual parts in an assembly.
Options- A. True
- B. False Discuss
- 8. A freehand sketch should show attention to proportion, clarity, and correct line widths.
Options- A. True
- B. False Discuss
- 9. The dimensioning standards used by a typical architectural firm were probably developed by the architects, designers, and drafters in the firm.
Options- A. True
- B. False Discuss
- 10. Dimensioning to the edges of doors and windows is the preferred method by most architectural drafters.
Options- A. True
- B. False Discuss
More questions
Correct Answer: True
Correct Answer: False
Correct Answer: True
Correct Answer: True
Correct Answer: True
Correct Answer: True
Correct Answer: True
Correct Answer: True
Correct Answer: True
Correct Answer: False
Comments
There are no comments.More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.