Discussion
Home ‣ Technical Drawing ‣ Working Drawings See What Others Are Saying!
- Question
In 3D assemblies, the last part added to the assembly becomes the parent part.
Options- A. True
- B. False
- Correct Answer
- False
- 1. The center line of a hidden cylinder feature appearing in the front view should line up with the center mark in the corresponding circle which appears in the auxiliary view.
Options- A. True
- B. False Discuss
- 2. When dimensioning piping drawings, you give the lengths of all runs of this type:
Options- A. Straight
- B. Angular
- C. Filleted
- D. Transverse Discuss
- 3. In working drawings for worm gears, gear teeth are omitted and the gear blank is represented conventionally.
Options- A. True
- B. False Discuss
- 4. This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:
Options- A. Computer-aided manufacturing
- B. Computer-aided design
- C. Computer-aided engineering
- D. Computer-aided prototyping Discuss
- 5. In oblique sketches, the most commonly used angles for receding lines are:
Options- A. 15 or 30 degrees
- B. 25 or 30 degrees
- C. 30 or 45 degrees
- D. 45 or 60 degrees Discuss
- 6. When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
Options- A. Linear dimension
- B. Aligned dimension
- C. Baseline dimension
- D. Angle dimension Discuss
- 7. A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
Options- A. architectural
- B. civil
- C. mechanical
- D. process piping Discuss
- 8. When using the descriptive geometry method to create an auxiliary view the drafter should ________.
Options- A. rotate the snap grid to the same angle of the inclined plane
- B. offset the right vertical line of the front view
- C. rotate the top line of the front view 45 degrees
- D. offset the top line of the front view 2 inches Discuss
- 9. When designing a home for a client, one of the most important pre-design considerations that an architect needs to address is ________.
Options- A. how much money the client is willing to spend.
- B. the site on which the house is to sit
- C. the nearest grocery store
- D. whether or not there is a curb and gutter system Discuss
- 10. Some of the common terms used to describe technical drawing include:
Options- A. Drafting
- B. Engineering Graphics
- C. Engineering Drawing
- D. All of the above Discuss
More questions
Correct Answer: True
Correct Answer: Straight
Correct Answer: True
Correct Answer: Computer-aided design
Correct Answer: 30 or 45 degrees
Correct Answer: Aligned dimension
Correct Answer: civil
Correct Answer: rotate the snap grid to the same angle of the inclined plane
Correct Answer: the site on which the house is to sit
Correct Answer: All of the above
Comments
There are no comments.More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.