Discussion
Home ‣ Digital Electronics ‣ Flip-Flops Comments
- Question
The major advantage of a Schmitt trigger input is that it ________.
Options- A. avoids erratic triggering
- B. has more triggering methods
- C. has a wider range of outputs
- D. can be retriggered
- Correct Answer
- avoids erratic triggering
- 1. Most people would prefer to use ________ over HDL.
Options- A. graphic descriptions
- B. functions
- C. VHDL
- D. AHDL Discuss
- 2. If an input is activated by a signal transition, it is ________.
Options- A. hair-triggered
- B. line-triggered
- C. pulse-triggered
- D. edge-triggered Discuss
- 3. Assume a J-K flip-flop has 1s on the J and K inputs. The next clock pulse will cause the output to ________.
Options- A. set
- B. reset
- C. latch
- D. toggle Discuss
- 4. In synchronous systems, the exact times at which any output can change state are determined by a signal commonly called the ________.
Options- A. traffic
- B. D
- C. flip-flop
- D. clock Discuss
- 5. In VHDL, each instance of a component is given a name followed by a ________ and the name of the library primitive.
Options- A. function
- B. signal
- C. semicolon
- D. colon Discuss
- 6. Regardless of whether you develop a description in AHDL or VHDL, the circuit's proper operation can be verified using a ________.
Options- A. PROCESS
- B. computer
- C. simulator
- D. primitive library Discuss
- 7. When the output of the NOR gate S-R flip-flop is Q = 0 and
, the inputs are:
Options- A. S = 1, R = 1
- B. S = 1, R = 0
- C. S = 0, R = 1
- D. S = 0, R = 0 Discuss
- 8. The asynchronous inputs are normally labeled ________ and ________, and are normally active-________ inputs.
Options- A. PRE, CLR, LOW
- B. ON, OFF, HIGH
- C. START, STOP, LOW
- D. SET, RESET, HIGH Discuss
- 9. What type of multivibrator is a latch?
Options- A. Astable
- B. Monostable
- C. Bistable
- D. It depends on the type of latch. Discuss
- 10. A retriggerable one-shot has a pulse width of 10 ms; 3 ms after being triggered, another trigger pulse is applied. The resulting output pulse will be ________ mS.
Options- A. 3
- B. 7
- C. 10
- D. 13 Discuss
Flip-Flops problems
Search Results
Correct Answer: graphic descriptions
Correct Answer: edge-triggered
Correct Answer: toggle
Correct Answer: clock
Correct Answer: colon
Correct Answer: simulator
Correct Answer: S = 0, R = 1
Correct Answer: PRE, CLR, LOW
Correct Answer: Bistable
Correct Answer: 13
Comments
There are no comments.More in Digital Electronics:
Programming
Copyright ©CuriousTab. All rights reserved.