Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Civil Engineering
»
GATE Exam Questions
Critical factors for the activated sludge treatment process are
maximum hourly flow rate.
maximum and minimum flow rate.
maximum hourly flow rate and maximum daily organic load.
minimum hourly flow rate and minimum daily organic load.
Correct Answer:
maximum hourly flow rate and maximum daily organic load.
← Previous Question
Next Question→
More Questions from
GATE Exam Questions
Maximum strain at the level of compression steel for a rectangular section having effective cover to compression steel as d' and neutral axis depth from compression face as xu is
MPN index is a measure of one of the following :
Presence of ifluoride in water greater than permissible level of 1.5 mg/l causes
The dimension of a pressure gradient in a fluid flow are :
The correct reinforcement-details at the corner of a rectangular water tank, in horizontal plane is shown by :
Negative skin friction occurs when :
The basic assumption of plane sections normal to the neutral axis before bending, remaining plane and normal to the neutral axis after bending, leads to :
At a rated capacity of 44 Cumecs, a centrifugal pump develops 36 m of head when operating at 1450 rpm. Its specific speed is :
A direct shear test was conducted on a cohesionless soil (c = 0) specimen under a normal stress of 200 kN/m2. The specimen failed at a shear stress of 100 kN/m2. The angle of internal friction of the soil (degrees) is
Both Reynolds and Froude numbers assume significance in one of following examples :
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments