The correct reinforcement-details at the corner of a rectangular water tank, in horizontal plane is shown by :

More Questions from GATE Exam Questions

• Negative skin friction occurs when :
• The basic assumption of plane sections normal to the neutral axis before bending, remaining plane and normal to the neutral axis after bending, leads to :
• At a rated capacity of 44 Cumecs, a centrifugal pump develops 36 m of head when operating at 1450 rpm. Its specific speed is :
• A direct shear test was conducted on a cohesionless soil (c = 0) specimen under a normal stress of 200 kN/m2. The specimen failed at a shear stress of 100 kN/m2. The angle of internal friction of the soil (degrees) is
• Both Reynolds and Froude numbers assume significance in one of following examples :
• The repeating variables in dimensional analysis should :
• A-2-hour unit hydrograph can be approximated as trapezoidal as shown in the below figure. The unit hydrograph refers to catchment of area
• A body moving through still water at 6 m/sec produces a water velocity of 4 m/sec at a point 1 m ahead. The difference in pressure between the nose and the point 1 m ahead would be
• In deriving the equation for the hydraulic jump in a rectangular channel in terms of the conjugate depths and the initial Froude number.
• The particle size distribution curves are extremely useful for the classification of

Discussion & Comments