Curioustab

Home » Civil Engineering » GATE Exam Questions

Maximum strain at the level of compression steel for a rectangular section having effective cover to compression steel as d' and neutral axis depth from compression face as xu is

0.0035 (1 - d'/xu)
0.002 (1 - d'/xu)
0.0035 (1 - xu/d')
0.002 (1 - xu/d')

Correct Answer: 0.0035 (1 - d'/xu)

← Previous Question Next Question→

More Questions from GATE Exam Questions

MPN index is a measure of one of the following :
Presence of ifluoride in water greater than permissible level of 1.5 mg/l causes
The dimension of a pressure gradient in a fluid flow are :
The correct reinforcement-details at the corner of a rectangular water tank, in horizontal plane is shown by :
Negative skin friction occurs when :
The basic assumption of plane sections normal to the neutral axis before bending, remaining plane and normal to the neutral axis after bending, leads to :
At a rated capacity of 44 Cumecs, a centrifugal pump develops 36 m of head when operating at 1450 rpm. Its specific speed is :
A direct shear test was conducted on a cohesionless soil (c = 0) specimen under a normal stress of 200 kN/m2. The specimen failed at a shear stress of 100 kN/m2. The angle of internal friction of the soil (degrees) is
Both Reynolds and Froude numbers assume significance in one of following examples :
The repeating variables in dimensional analysis should :

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion