Discussion
Home ‣ Technical Drawing ‣ Computer Aided Design Basics Comments
- Question
The UCS icon represents the intersection of the ________.
Options- A. X axis
- B. Y axis
- C. Z axis
- D. All of the above
- Correct Answer
- All of the above
- 1. When setting up a mechanical drawing in AutoCAD the drafter should set the units to ________.
Options- A. fractional
- B. decimal
- C. architectural
- D. metric Discuss
- 2. When drawing a line using the relative coordinate system a line is created from ________.
Options- A. 0,0
- B. the ending point of the last line
- C. the beginning point of the last line
- D. none of the above Discuss
- 3. In order to set drawing limits for a "C" size architectural drawing the drafter should set the limits to ________.
Options- A. 0,0 and 2,9
- B. 0,0 and 17,11
- C. 0,0 and 18,24
- D. 0,0 and 34,24 Discuss
- 4. Understanding the Cartesian coordinate system will help the beginning drafter ________.
Options- A. control the accuracy of the drawing
- B. produce a visible grid system
- C. select a different text style
- D. choose various line types Discuss
- 5. If you use the absolute coordinate system to create a line from a starting point of 0, 0 8 units on the X axis and 5 units on the Y axis you enter ________ for the second point.
Options- A. 8,5
- B. 5,8
- C. 0,8
- D. 5,0 Discuss
- 6. Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
Options- A. type @3<45 and enter
- B. type 3 back slash and enter
- C. type 3 forward slash and enter
- D. type 3 and try to use the Dynamic Input readout to find the end point Discuss
- 7. When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.
Options- A. pull the line from away from the starting point very carefully
- B. insure that Ortho is on
- C. enter 3 for the length of the line
- D. read the coordinate position on the Dynamic Readout Discuss
- 8. One quick way to view the entire drawing area is to use the Zoom command by typing ________.
Options- A. type Z enter A enter
- B. type Z enter E enter
- C. type SHOWALL enter
- D. type ALL enter Discuss
- 9. In some circumstances an entire drawing can be inserted into a different drawing as a block. When this is used the base point will default to ________.
Options- A. 0,0
- B. 10,10
- C. 20,20
- D. 30,30 Discuss
- 10. When creating your own blocks it is important to avoid drawing any portion of the block in the ________ layer.
Options- A. 0
- B. center line
- C. hatch
- D. hidden line Discuss
Computer Aided Design Basics problems
Search Results
Correct Answer: decimal
Correct Answer: the ending point of the last line
Correct Answer: 0,0 and 18,24
Correct Answer: control the accuracy of the drawing
Correct Answer: 8,5
Correct Answer: type @3<45 and enter
Correct Answer: insure that Ortho is on
Correct Answer: type Z enter A enter
Correct Answer: 0,0
Correct Answer: 0
Comments
There are no comments.More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.