Discussion
Home ‣ Technical Drawing ‣ Computer Aided Design Basics Comments
- Question
Understanding the Cartesian coordinate system will help the beginning drafter ________.
Options- A. control the accuracy of the drawing
- B. produce a visible grid system
- C. select a different text style
- D. choose various line types
- Correct Answer
- control the accuracy of the drawing
- 1. If you use the absolute coordinate system to create a line from a starting point of 0, 0 8 units on the X axis and 5 units on the Y axis you enter ________ for the second point.
Options- A. 8,5
- B. 5,8
- C. 0,8
- D. 5,0 Discuss
- 2. A line with a tapering width can be easily created by using the ________ tool.
Options- A. circle
- B. eclipse
- C. line
- D. polyline Discuss
- 3. In this type of drawing, vertical pipes may be revolved into the horizontal plane:
Options- A. Standard view
- B. Elevation view
- C. Transverse piping
- D. Developed piping Discuss
- 4. This is used in applications for nonferrous construction:
Options- A. Copper tubing
- B. Steel pipe
- C. PVC pipe
- D. Iron tubing Discuss
- 5. When dimensioning piping drawings, you give the lengths of all runs of this type:
Options- A. Straight
- B. Angular
- C. Filleted
- D. Transverse Discuss
- 6. In order to set drawing limits for a "C" size architectural drawing the drafter should set the limits to ________.
Options- A. 0,0 and 2,9
- B. 0,0 and 17,11
- C. 0,0 and 18,24
- D. 0,0 and 34,24 Discuss
- 7. When drawing a line using the relative coordinate system a line is created from ________.
Options- A. 0,0
- B. the ending point of the last line
- C. the beginning point of the last line
- D. none of the above Discuss
- 8. When setting up a mechanical drawing in AutoCAD the drafter should set the units to ________.
Options- A. fractional
- B. decimal
- C. architectural
- D. metric Discuss
- 9. The UCS icon represents the intersection of the ________.
Options- A. X axis
- B. Y axis
- C. Z axis
- D. All of the above Discuss
- 10. Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
Options- A. type @3<45 and enter
- B. type 3 back slash and enter
- C. type 3 forward slash and enter
- D. type 3 and try to use the Dynamic Input readout to find the end point Discuss
Computer Aided Design Basics problems
Search Results
Correct Answer: 8,5
Correct Answer: polyline
Correct Answer: Developed piping
Correct Answer: Copper tubing
Correct Answer: Straight
Correct Answer: 0,0 and 18,24
Correct Answer: the ending point of the last line
Correct Answer: decimal
Correct Answer: All of the above
Correct Answer: type @3<45 and enter
Comments
There are no comments.More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.