Discussion
Home ‣ Technical Drawing ‣ Piping Drawings Comments
- Question
This is used in applications for nonferrous construction:
Options- A. Copper tubing
- B. Steel pipe
- C. PVC pipe
- D. Iron tubing
- Correct Answer
- Copper tubing
- 1. When dimensioning piping drawings, you give the lengths of all runs of this type:
Options- A. Straight
- B. Angular
- C. Filleted
- D. Transverse Discuss
- 2. This type of pipe is commonly used for water or gas service, and also as soil pipe:
Options- A. PVC
- B. Copper
- C. Steel
- D. Cast-iron Discuss
- 3. This type of drawing shows two lines representing the pipe diameter:
Options- A. Single-line
- B. Double-line
- C. Standard piping
- D. Centerline piping Discuss
- 4. These types of pipes are generally connected with bell and spigot joints or flanged joints:
Options- A. Soil and waste
- B. Water and gas
- C. Water and steam
- D. Gas and soil Discuss
- 5. This type of pipe is commonly used for water, steam, oil, and gas:
Options- A. Wrought iron or copper
- B. PVC or steel
- C. Steel or wrought iron
- D. Copper or PVC Discuss
- 6. In this type of drawing, vertical pipes may be revolved into the horizontal plane:
Options- A. Standard view
- B. Elevation view
- C. Transverse piping
- D. Developed piping Discuss
- 7. A line with a tapering width can be easily created by using the ________ tool.
Options- A. circle
- B. eclipse
- C. line
- D. polyline Discuss
- 8. If you use the absolute coordinate system to create a line from a starting point of 0, 0 8 units on the X axis and 5 units on the Y axis you enter ________ for the second point.
Options- A. 8,5
- B. 5,8
- C. 0,8
- D. 5,0 Discuss
- 9. Understanding the Cartesian coordinate system will help the beginning drafter ________.
Options- A. control the accuracy of the drawing
- B. produce a visible grid system
- C. select a different text style
- D. choose various line types Discuss
- 10. In order to set drawing limits for a "C" size architectural drawing the drafter should set the limits to ________.
Options- A. 0,0 and 2,9
- B. 0,0 and 17,11
- C. 0,0 and 18,24
- D. 0,0 and 34,24 Discuss
Piping Drawings problems
Search Results
Correct Answer: Straight
Correct Answer: Cast-iron
Correct Answer: Double-line
Correct Answer: Water and gas
Correct Answer: Steel or wrought iron
Correct Answer: Developed piping
Correct Answer: polyline
Correct Answer: 8,5
Correct Answer: control the accuracy of the drawing
Correct Answer: 0,0 and 18,24
Comments
There are no comments.More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.