Discussion
Home ‣ Technical Drawing ‣ Manufacturing Processes Comments
- Question
This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic object:
Options- A. Core
- B. Cavity
- C. Prototype
- D. Hole mold
- Correct Answer
- Core
- 1. This process recognizes the inherent interrelationships between design and manufacturing:
Options- A. Design for manufacture
- B. Design for manufacture and assembly
- C. Design for concurrent engineering
- D. Design for assembly Discuss
- 2. Approximately this much of the cost of product development and manufacture is determined at the design stage:
Options- A. 40-50%
- B. 60-75%
- C. 70-80%
- D. 75-85% Discuss
- 3. Circular shapes appear in this fashion when viewed at an angle other than 90 degrees:
Options- A. Circular
- B. Elliptical
- C. Lengthened
- D. Angular Discuss
- 4. In this type of auxiliary view, a break line is used to indicate the imaginary break in the views:
Options- A. Primary
- B. Secondary
- C. Revolved
- D. Partial Discuss
- 5. When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
Options- A. Linear dimension
- B. Aligned dimension
- C. Baseline dimension
- D. Angle dimension Discuss
- 6. This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:
Options- A. Computer-aided manufacturing
- B. Computer-aided design
- C. Computer-aided engineering
- D. Computer-aided prototyping Discuss
- 7. Manufacturing may produce these types of products:
Options- A. Discrete or continuous
- B. Raw material or parts
- C. Machinery or manufactured
- D. Processes or operations Discuss
- 8. This type of rapid prototyping system uses a laser to fuse powdered metals, plastics, or ceramics:
Options- A. Fused deposition modeling
- B. Stereolithography apparatus
- C. Solid ground curing
- D. Selective laser sintering Discuss
- 9. This allows the designer to conceptualize objects more easily without having to make costly illustrations, models, or prototypes:
Options- A. Computer-aided manufacturing
- B. Computer-aided design
- C. Computer-aided engineering
- D. Computer-aided prototyping Discuss
- 10. The second line of dimensions out from the plan generally includes ________.
Options- A. Centers of doors and windows
- B. The distances between outside walls and interior walls.
- C. The measurement from the outside of the brick to the inside of the exterior wall.
- D. The measurement from one outside corner to the opposite outside corner. Discuss
Manufacturing Processes problems
Search Results
Correct Answer: Design for manufacture and assembly
Correct Answer: 70-80%
Correct Answer: Elliptical
Correct Answer: Partial
Correct Answer: Aligned dimension
Correct Answer: Computer-aided engineering
Correct Answer: Discrete or continuous
Correct Answer: Selective laser sintering
Correct Answer: Computer-aided design
Correct Answer: The distances between outside walls and interior walls.
Comments
There are no comments.More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.