logo

CuriousTab

CuriousTab

Discussion


Home Technical Drawing Tolerancing Comments

  • Question
  • This is the theoretically exact size from which limits of size are determined:


  • Options
  • A. Actual Size
  • B. Dimensioned size
  • C. Production size
  • D. Basic size

  • Correct Answer
  • Basic size 


  • Tolerancing problems


    Search Results


    • 1. This means that a feature of a finished product contains the maximum amount of material permitted by the toleranced dimensions for that feature:

    • Options
    • A. Maximum material condition
    • B. Machined material condition
    • C. Maximum machined indication
    • D. Machine mark indication
    • Discuss
    • 2. This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:

    • Options
    • A. Limits
    • B. Fit
    • C. Specifications
    • D. Allowance
    • Discuss
    • 3. This practice considers an individual part's dimensions and tolerances and that part's relation to its related parts:

    • Options
    • A. Applying allowances
    • B. Geometric dimensioning and tolerancing
    • C. Creating datum references
    • D. Angular dimensioning tolerances
    • Discuss
    • 4. This is the measured size of a finished part:

    • Options
    • A. Actual size
    • B. Dimensioned size
    • C. Production size
    • D. Basic size
    • Discuss
    • 5. The ________ tool on the Dimension tool bar will place several dimensions at one time by using a selection box placed over several part features.

    • Options
    • A. Linear
    • B. Continue
    • C. Baseline
    • D. Quick Dimension
    • Discuss
    • 6. Acceptable parts must not extend beyond this:

    • Options
    • A. Boundary limits
    • B. Hole limits
    • C. Specification
    • D. Tolerances
    • Discuss
    • 7. When lines intersect on a drawing at angles of this many degrees, it is customary not to dimension the angle:

    • Options
    • A. 360
    • B. 180
    • C. 90
    • D. 45
    • Discuss
    • 8. This should show what changes were made, when, and by whom:

    • Options
    • A. Portable document
    • B. Record of revisions
    • C. Title form
    • D. Revision drawings
    • Discuss
    • 9. These drawings are given to contractors to perform work or manufacture individual parts:

    • Options
    • A. Assembly details
    • B. 3D drawings
    • C. Working drawings
    • D. Skeleton assemblies
    • Discuss
    • 10. In an assembly section, these parts should have their section lines left out or shown solid black:

    • Options
    • A. Bolts
    • B. All fasteners
    • C. Thin parts
    • D. Rivets
    • Discuss


    Comments

    There are no comments.

Enter a new Comment