Discussion
Home ‣ Technical Drawing ‣ Tolerancing Comments
- Question
This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:
Options- A. Limits
- B. Fit
- C. Specifications
- D. Allowance
- Correct Answer
- Fit
- 1. This practice considers an individual part's dimensions and tolerances and that part's relation to its related parts:
Options- A. Applying allowances
- B. Geometric dimensioning and tolerancing
- C. Creating datum references
- D. Angular dimensioning tolerances Discuss
- 2. This is the measured size of a finished part:
Options- A. Actual size
- B. Dimensioned size
- C. Production size
- D. Basic size Discuss
- 3. The ________ tool on the Dimension tool bar will place several dimensions at one time by using a selection box placed over several part features.
Options- A. Linear
- B. Continue
- C. Baseline
- D. Quick Dimension Discuss
- 4. How can the drafter prevent AutoCAD from placing or stacking another center mark on a circle when adding a diameter dimension to it?
Options- A. Explode the dimension and then erase the center mark.
- B. Use the Properties dialog box to turn off the center mark of the dimension.
- C. It can't be done.
- D. Use the trim tool to take away the stacked center mark. Discuss
- 5. Given a situation in which the drafter has crossed extension lines in a drawing what can be done to clean up the point of crossing?
Options- A. Use the Modify tool to clean up the extension lines.
- B. Use the Tolerance tool to clean up the extension lines.
- C. Use the Break tool to clean up the extension lines.
- D. Use the stretch tool to clean up the extension lines. Discuss
- 6. This means that a feature of a finished product contains the maximum amount of material permitted by the toleranced dimensions for that feature:
Options- A. Maximum material condition
- B. Machined material condition
- C. Maximum machined indication
- D. Machine mark indication Discuss
- 7. This is the theoretically exact size from which limits of size are determined:
Options- A. Actual Size
- B. Dimensioned size
- C. Production size
- D. Basic size Discuss
- 8. Acceptable parts must not extend beyond this:
Options- A. Boundary limits
- B. Hole limits
- C. Specification
- D. Tolerances Discuss
- 9. When lines intersect on a drawing at angles of this many degrees, it is customary not to dimension the angle:
Options- A. 360
- B. 180
- C. 90
- D. 45 Discuss
- 10. This should show what changes were made, when, and by whom:
Options- A. Portable document
- B. Record of revisions
- C. Title form
- D. Revision drawings Discuss
Tolerancing problems
Search Results
Correct Answer: Geometric dimensioning and tolerancing
Correct Answer: Actual size
Correct Answer: Quick Dimension
Correct Answer: Use the Properties dialog box to turn off the center mark of the dimension.
Correct Answer: Use the Modify tool to clean up the extension lines.
Correct Answer: Maximum material condition
Correct Answer: Basic size
Correct Answer: Boundary limits
Correct Answer: 90
Correct Answer: Record of revisions
Comments
There are no comments.More in Technical Drawing:
Programming
Copyright ©CuriousTab. All rights reserved.