logo

CuriousTab

CuriousTab

Discussion


Home Technical Drawing Dimensioning Comments

  • Question
  • This is a line terminated by arrowheads, indicating the direction and extent of a dimension:


  • Options
  • A. Dimension line
  • B. Extension line
  • C. Arrowhead line
  • D. Centerline

  • Correct Answer
  • Dimension line 


  • Dimensioning problems


    Search Results


    • 1. Architectural drawings used to construct a house are often plotted with a scale of ¼" = 1'-0". What scale is this?

    • Options
    • A. Quarter
    • B. Half
    • C. Full
    • D. Double
    • Discuss
    • 2. The AutoCAD command used to combine two or more primitive shapes into a single complex 3-dimensional model is ________.

    • Options
    • A. add
    • B. union
    • C. attach
    • D. form
    • Discuss
    • 3. Most architectural drawings produced for field use by building contractors are printed on architectural "D" size paper which measures ________.

    • Options
    • A. 24" X 36"
    • B. 18" X 24"
    • C. 11" X 17"
    • D. 34" X 22"
    • Discuss
    • 4. Geometric primitives include shapes such as ________.

    • Options
    • A. boxes
    • B. cylinders
    • C. wedges
    • D. all of the above
    • Discuss
    • 5. If a designer is developing a plan for a project in which the entire part is made out of ¾" thick plywood and he only wants to use one view, he should use the ________ view.

    • Options
    • A. front
    • B. top
    • C. right
    • D. back
    • Discuss
    • 6. Baseline dimensions are referenced from a common geometric feature known as a ________.

    • Options
    • A. edge
    • B. corner
    • C. datum
    • D. point of reference
    • Discuss
    • 7. This is a thin solid line directing attention to a note or dimension and starting with an arrowhead or dot:

    • Options
    • A. Dimension line
    • B. Extension line
    • C. Leader
    • D. Specification
    • Discuss
    • 8. This is the total amount that the feature on the actual part is allowed to vary from what is specified by the dimension:

    • Options
    • A. Allowance
    • B. Tolerance
    • C. Specification
    • D. Difference
    • Discuss
    • 9. The ________ tool on the Dimension tool bar places the length of an arch on a drawing.

    • Options
    • A. Arc Radius
    • B. Arc Length
    • C. Radius
    • D. Diameter
    • Discuss
    • 10. This is used to indicate that a surface is to be machined:

    • Options
    • A. Finish mark
    • B. Machining mark
    • C. Roughness indicator
    • D. Coordinate mark
    • Discuss


    Comments

    There are no comments.

Enter a new Comment