How would a latch circuit be used in a microprocessor system? as transportation

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Digital Electronics ‣ Shift Registers Comments

Question
How would a latch circuit be used in a microprocessor system?
Options
A. as transportation for Intel employees
B. for a group of data that is the same
C. as a set of common connections for transfer of data

Correct Answer

as a set of common connections for transfer of data

Shift Registers problems

Search Results

3. The bit sequence 0010 is serially entered (right-most bit first) into a 4-bit parallel out shift register that is initially clear. What are the Q outputs after two clock pulses?
Options
A. 0000
B. 0010
C. 1000
D. 1111

4. A bidirectional 4-bit shift register is storing the nibble 1110. Its input is LOW. The nibble 0111 is waiting to be entered on the serial data-input line. After two clock pulses, the shift register is storing ________.
Options
A. 1110
B. 0111
C. 1000
D. 1001

7. When is it important to use a three-state buffer?
Options
A. when two or more outputs are connected to the same input
B. when all outputs are normally HIGH
C. when all outputs are normally LOW
D. when two or more outputs are connected to two or more inputs

8. When the output of a tristate shift register is disabled, the output level is placed in a:
Options
A. float state
B. LOW state
C. high-impedance state
D. float or high-impedance state

9. To operate correctly, starting a ring shift counter requires:
Options
A. clearing all the flip-flops
B. presetting one flip-flop and clearing all others
C. clearing one flip-flop and presetting all others
D. presetting all the flip-flops

10. The group of bits 11001 is serially shifted (right-most bit first) into a 5-bit parallel output shift register with an initial state 01110. After three clock pulses, the register contains ________.
Options
A. 01110
B. 00001
C. 00101
D. 00110

Comments

More in Digital Electronics: