Curioustab

Home » Digital Electronics » The 8051 Microcontroller

Bit-addressable memory locations are:

10H through 1FH
20H through 2FH
30H through 3FH
40H through 4FH

Correct Answer: 20H through 2FH

← Previous Question Next Question→

More Questions from The 8051 Microcontroller

The designs of a centigrade thermometer and a PWM speed-control circuit can be implemented by the 8051.
Device pins XTAL1 and XTAL2 for the 8051 are used for connections to an external oscillator or crystal.
This statement will set the address of the bit to 1 (8051 Micro-controller): SETB 01H
This program code will read data from port 0 and write it to port 2, and it will stop looping when bit 3 of port 2 is set: STAT: MOV A, PO MOV P2,A JNB P2.3, STAT
The 8051 can handle ________ interrupt sources.
The 8-bit address bus allows access to an address range of:
Which of the following commands will copy the contents of location 4H to the accumulator?
The following command will rotate the 8 bits of the accumulator one position to the left: RL A
An alternate function of port pin P3.0 (RXD) in the 8051 is:
The following command will copy the accumulator to the location whose address is 23H: MOV 23H,A

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion