Curioustab

Home » Civil Engineering » Waste Water Engineering

The self-cleansing velocity of water flowing through pipe lines, is

2 metres/sec
1 metre/sec
0.5 metre/sec
0.25 metre/sec.

Correct Answer: 2 metres/sec

← Previous Question Next Question→

More Questions from Waste Water Engineering

The spacing of bars of perforations of fine screens used for the treatment of sewage, is
Sewer pipes are designed for maximum discharge with 25% to 33% vacant cross-sectional area for
The water carried sewerage system removes
The design period in years for pumping plants, is
The Chezy's constant C in the formula V = C rs depends upon
Water content of sewage is about
For trunk sewers more than 1.25 m in diameter, the ratio of the maximum daily sewage flow to the average daily sewage flow is assumed
Afive day B.O.D. at 15°C of the sewage of a town is 100 kg/day. If the 5 day B.O.D. per head at 15°C for standard sewage is 0.1 kg/day, the population equivalent is
If the peak discharge of a storm water drain (S.W. Drain) is e.xpected to exceed 150 cumecs, the free board to be provided, is
For a grit chamber, if the recommended velocity of flow is 0.2 m/sec and detention period is 2 minutes, the length of the tank, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion