Curioustab

Home » Civil Engineering » Theory of Structures

A simply supported uniform rectangular bar breadth b, depth d and length L, carries an isolated load W at its mid-span. The same bar experiences an extension e under same tensile load. The ratio of the maximum deflection to the elongation, is

Correct Answer:

← Previous Question Next Question→

More Questions from Theory of Structures

For the close coil helical spring of the maximum deflection is
The ratio of the maximum deflections of a simply supported beam with a central load W and of a cantilever of same length and with a load W at its free end, is
The ratio of the area of cross-section of a circular section to the area of its core, is
The S.F. diagram of a loaded beam shown in the given figure is that of
The ratio of shear stress and shear strain of an elastic material, is
The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due to flowing liquid, is
A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 x 106 N/mm2, the depth of the joist, is
A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
At yield point of a test piece, the material
is the equation for Euler's crippling load if

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion