Curioustab

Home » Civil Engineering » Theory of Structures

A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 x 106 N/mm2, the depth of the joist, is

200 mm
250 mm
300 mm
350 mm
400 mm

Correct Answer: 400 mm

← Previous Question Next Question→

More Questions from Theory of Structures

A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
At yield point of a test piece, the material
is the equation for Euler's crippling load if
The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is
A three hinged arch is generally hinged at its supports and
In the truss, the force in the member AC is
A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 x 106 N/mm2, the deflection of the free end, is
The moment of inertia of a triangular section (height h, base b) about its base, is
Pick up the correct statement from the following:
If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 x 105 N/mm2) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm2, the angle of twist in radians, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion