For the close coil helical spring of the maximum deflection is

More Questions from Theory of Structures

• The ratio of the maximum deflections of a simply supported beam with a central load W and of a cantilever of same length and with a load W at its free end, is
• The ratio of the area of cross-section of a circular section to the area of its core, is
• The S.F. diagram of a loaded beam shown in the given figure is that of
• The ratio of shear stress and shear strain of an elastic material, is
• The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due to flowing liquid, is
• A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 x 106 N/mm2, the depth of the joist, is
• A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
• At yield point of a test piece, the material
• is the equation for Euler's crippling load if
• The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is

Discussion & Comments