Curioustab

Home » Civil Engineering » Surveying

It is more difficult to obtain good results while measuringhorizontal distance by stepping

up-hill
down-hill
in low undulations
in plane areas.

Correct Answer: up-hill

← Previous Question Next Question→

More Questions from Surveying

Pick up the incorrect statement from the following :
If + 0.8% grade meets - 0.7% grade and the rate of change of grade for 30 m distance is 0.05, the length of the vertical curve will be
In a telescope the object glass of focal length 14 cm, is located at 20 cm from the diaphragm. The focussing lens is midway between them when a staff 16.50 m away is focussed. The focal length of the focussing lens, is
If D is the degree of the curve of radius R, the exact length of its specified chord, is
The 10 mm markings on a levelling staff placed at 20 m are separated by
Tilt of the staff in stadia tacheometry increases the intercept if it is
A lens or combination of lenses in which the following defect is completely eliminated is called aplanatic
If the chain line which runs along N-S direction is horizontal and the ground in E-W direction is sloping
The properties of autogenous curve for automobiles are given by
To orient a plane table at a point with two inaccessible points, the method generally adopted, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion