Curioustab

Home » Civil Engineering » Surveying

If L is in kilometres, the curvature correction is

58.2 L2 mm
64.8 L2 mm
74.8 L2 mm
78.4 L2 mm.

Correct Answer: 78.4 L2 mm.

← Previous Question Next Question→

More Questions from Surveying

A standard steel tape of length 30 m and cross-section 15 x 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 x 106 kg/cm2, the correction to be applied is
The zero of the graduated circle of a prismatic compass is located at
Magnetic declination at any place
The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is
Systematic errors are those errors
Greater accuracy in linear measurements, is obtained by
From any point on the surface with a given inclination
Which of the following introduces an error of about 1 in 1000 if 20 m chain is used
Total latitude of a point is positive if it lies
Perpendicularity of an offset may be judged by eye, if the length of the offset is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion