Curioustab

Home » Civil Engineering » Surveying

Check lines (or proof lines) in Chain Surveying, are essentially required

to plot the chain lines
to plot the offsets
to indicate the accuracy of the survey work
to increase the out-turn

Correct Answer: to indicate the accuracy of the survey work

← Previous Question Next Question→

More Questions from Surveying

The distance between terminal points computed from a subsidiary traverse run between them, is generally known, as
A sewer is laid from a manhole A to a manhole B, 250 m away along a gradient of 1 in 125. If the reduced level of the invert at A is 205.75 m and the height of the boning rod is 3 m, the reduced level of the sight rail at B, is
For locating a distant object visible from two transit stations, the method usually preferred to, is
Chain surveying is well adopted for
The line of collimation method of reduction of levels, does not provide a check on
Short offsets are measured with
The approximate formula for radial or perpendicular offsets from the tangent, is
Correction per chain length of 100 links along a slope having a rise of 1 unit in n horizontal units, is
Which one of the following statements is correct?
Prolongation of chain line across an obstruction in chain surveying, is done by

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion