Curioustab

Home » Civil Engineering » Surveying

An angle of deflection right, may be directly obtained by setting the instrument to read

zero on back station
180° on back station
90°
270° on back station.

Correct Answer: zero on back station

← Previous Question Next Question→

More Questions from Surveying

The reduced bearing of a line is N 87° W. Its whole circle bearing is
Accurate measurement of deflection angles with a transit not properly adjusted may be made by
If whole circle bearing of a line is 120°, its reduced bearing is
Transition curves are introduced at either end of a circular curve, to obtain
The distance between the point of intersection of an up grade + g1% and downgrade g2% and the highest point of the vertical curve of length L, is
If L is in kilometres, the curvature correction is
A standard steel tape of length 30 m and cross-section 15 x 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 x 106 kg/cm2, the correction to be applied is
The zero of the graduated circle of a prismatic compass is located at
Magnetic declination at any place
The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion