Curioustab

Home » Civil Engineering » Structural Design Specifications

The ratio of the effective lengths of two columns, one effectively held in position at one end and partially restrained at the other end, and the other effectively held in position at one end and free at the other end, is

Correct Answer:

← Previous Question Next Question→

More Questions from Structural Design Specifications

The pitch of transverse reinforcement of a column is taken as
The maximum pitch of rivets for compression and tension members should not exceed
As per IS : 1982, the permissible axial tension in rolled I-beams and channels, is
Minimum diameter of the lateral ties should not be less than
The tolerances for the form work of columns and beams range from
The maximum spacing of shear reinforcement should not exceed 0.75 d subject to a minimum of
Pick up the correct statement applicable to cased columns.
The ratio of the effective length to the least radius of gyration of a tie member of a roof truss, which gets subjected to reversal of stress shall not exceed
The individual part of the structures is subjected to a load test for 24 hours by applying a load equal to full dead load of the structure plus
If the ratio of effective span to overall depth of a simply supported beam is less than 1, the lever arm is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion