Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Civil Engineering
»
Structural Design Specifications
Pick up the correct statement from the following:
The diameter of a rivet, before driving is taken as the nominal diameter of the rivet
The diameter of the rivet hole is taken as the gross area of the rivet
For rivets of nominal diameters less than 25 mm, the diameter of the rivet hole is taken as the nominal diameter of the rivet plus 1.5 mm
For rivets of nominal diameters exceeding 25 mm, the diameter of the rivet hole is taken as the nominal diameter of the rivet plus 2 mm
All the above.
Correct Answer:
All the above.
← Previous Question
Next Question→
More Questions from
Structural Design Specifications
A solid slab spanning in two directions at right angles and carrying a uniformly distributed load, is supported on beams. If the length of two such beams A and B perpendicular to each other are x and y (x
In the formula a + bk for the calculation of the net effective section of single tee in tension connected by flange to the same side of the same side of the gusset, the value of 'k' is taken
Pick up the correct statement from the following:
If b is actual width of a flange, Dt is the thickness of the flange, bω is the breath of the web, lo is the distance between the points of zero moments in a beam, the effective width of the flange, is
All reinforcement should be free from
To achieve uniform colour and consistency of the concrete by using ordinary Portland cement, the mixing time may be
If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least ......of main reinforcement
For all practical purposes, the modulus of elasticity of steel is assumed
For spans upto 10 m, the safe span to depth ratio for
The angle of inclination of the lacing bars with axis of the member is kept between
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments