The outstand of stiffeners should be (where t is the thickness of flat).

More Questions from Structural Design Specifications

• For battened struts, the effective length is increased by
• The area of the concrete in compression plus the area of reinforcement transferred on the basis of modular ratio, is called
• The maximum compressive strength on 15 cm cubes of M 20 grade concrete at 7 days, should be a minimum of
• The designed transverse shear in lacing is assumed as
• The approximate value of torsion constant k for a box of depth d, width b, and having uniform thickness t, is
• A continuous beam shall be deemed to be a deep beam if the ratio of its effective span to overall depth, is
• Pick up the correct precaution while spilicing the reinforcing bars
• For the plain reinforcing bars in compression, the permissible design bond stress in tension, is increased by
• If the dimensions of a rectangular section of a short column are 15 cm x 20 cm, its unsupported length should be restricted to
• For rolled I-beams and channels, permissible tensile and compressive stresses does not exceed

Discussion & Comments