Curioustab

Home » Civil Engineering » Structural Design Specifications

If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least ......of main reinforcement

40%
50%
60%
70%.

Correct Answer: 60%

← Previous Question Next Question→

More Questions from Structural Design Specifications

For all practical purposes, the modulus of elasticity of steel is assumed
For spans upto 10 m, the safe span to depth ratio for
The angle of inclination of the lacing bars with axis of the member is kept between
If fck is characteristic compressive strength of concrete, the flexural and split tensile strength fcr = afck N/mm2 where the value of a is
The minimum area of cross section of reinforcement in either direction of a slab should not be less than ...... of the slab cross section
The thickness 't' of a rectangular column base which is provided for distributing the load uniformly, is calculated from the formula
For calculating critical compression stress in bending Cs for sections symmetrical about the x-x axis, from the formula , the value of G is taken
The minimum diameter of longitudinal reinforcement of a column should not be less than
The grade of reinforced concrete to be used in sea water or structures exposed to sea water should be
If fck is the characteristic cube strength of concrete in N/mm2, the modulus of elasticity of structural concrete Ec = afck where the value of a, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion