If D is the overall thickness of the slab, the diameter of the reinforcing bars should not exceed

More Questions from Structural Design Specifications

• The minimum pitch i.e., the distance between centres of rivet holes is not less than
• The value of fbct in the formula for calculating the thickness of a Rectangular base, according to IS : 800-1982, is
• For heavily reinforced concrete member, the nominal maximum size of the aggregates should be restricted to
• The concrete is deemed not to comply with the strength requirements if the strength is less than the greater of
• In case of continuous beams, the distance between the points of zero moment, may be obtained as (where l is the effective span).
• If a column is subjected to dead load and super imposed load only, the maximum ratio should not be greater than
• The creep coefficient i.e. the ratio of ultimate creep and elastic strain after
• The maximum deflection of a structure should not normally exceed lesser of the span/350 or
• The depth 'd' of webs without horizontal stiffeners and consisting of tongue plates is taken lesser than the depth of the girder between the flanges less the sum of the depth of the tongue plates, and
• The maximum area of compression reinforcement in a beam of cross section B x D is limited to

Discussion & Comments