Curioustab

Home » Civil Engineering » Structural Design Specifications

If a column is subjected to dead load and super imposed load only, the maximum ratio should not be greater than

180
250
350
400

Correct Answer: 180

← Previous Question Next Question→

More Questions from Structural Design Specifications

The creep coefficient i.e. the ratio of ultimate creep and elastic strain after
The maximum deflection of a structure should not normally exceed lesser of the span/350 or
The depth 'd' of webs without horizontal stiffeners and consisting of tongue plates is taken lesser than the depth of the girder between the flanges less the sum of the depth of the tongue plates, and
The maximum area of compression reinforcement in a beam of cross section B x D is limited to
Pick up the correct statement regarding columns.
The outstand of stiffeners should be (where t is the thickness of flat).
For battened struts, the effective length is increased by
The area of the concrete in compression plus the area of reinforcement transferred on the basis of modular ratio, is called
The maximum compressive strength on 15 cm cubes of M 20 grade concrete at 7 days, should be a minimum of
The designed transverse shear in lacing is assumed as

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion