Curioustab

Home » Civil Engineering » Structural Design Specifications

Creep of concrete is assumed proportional to the stress if the stress does not exceed .......of the characteristic compressive strength

15%
20%
25%
33%
50%

Correct Answer: 33%

← Previous Question Next Question→

More Questions from Structural Design Specifications

For design purpose, the moment at the support where two unequal spans or spans not equally loaded meet, is
The ratio of the effective lengths of two columns, one effectively held in position at one end and partially restrained at the other end, and the other effectively held in position at one end and free at the other end, is
The pitch of transverse reinforcement of a column is taken as
The maximum pitch of rivets for compression and tension members should not exceed
As per IS : 1982, the permissible axial tension in rolled I-beams and channels, is
Minimum diameter of the lateral ties should not be less than
The tolerances for the form work of columns and beams range from
The maximum spacing of shear reinforcement should not exceed 0.75 d subject to a minimum of
Pick up the correct statement applicable to cased columns.
The ratio of the effective length to the least radius of gyration of a tie member of a roof truss, which gets subjected to reversal of stress shall not exceed

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion